Landlord gas safety certificate: how often, how long it lasts and what to do with it
Last reviewed 13 November 2026
The short answer
If you let a property with gas appliances, you must have each gas appliance and flue you provide checked by a Gas Safe registered engineer at least every 12 months. The engineer gives you a gas safety record, often called a gas safety certificate or CP12. Each one covers a single check, so a new check and record are needed at least every 12 months. You must give existing tenants a copy within 28 days of the check, give new tenants a copy before they move in, and keep each record for at least two years.
This guide is based on guidance from the Health and Safety Executive (HSE) on the Gas Safety (Installation and Use) Regulations 1998, which apply in England, Scotland and Wales. Northern Ireland has its own regulations, covered at the end.
What the check covers
- HSE says all permanent and portable gas appliances and flues in the property require an annual gas safety check. As a landlord you are responsible for any appliance you own and provide for the tenant’s use.
- Tenants are responsible for appliances they own, and for a flue that serves only their own appliance. HSE recommends including all connected flues, such as chimneys, in the check anyway.
- Communal appliances that serve several homes must also be maintained by a Gas Safe registered engineer and checked.
- If the property has no gas appliances but gas pipework or a flue runs through it, no annual check is needed, but you must still keep the pipework safe.
How often, and checking early
- Each appliance and flue needs a check at least every 12 months.
- A gas safety certificate does not run for a fixed number of years. Each one records the check on its date, and the next check is due within 12 months, or on the original due date if you checked up to two months early.
- Before a new tenancy starts, the checks must have been done within the previous year.
- You can have the check done up to two months before it is due and keep the original due date, so the anniversary does not keep moving earlier. If you do this, you must be able to show the checks met the required timescales.
Giving tenants a copy
- Existing tenants: a copy within 28 days of the check being completed.
- New tenants: a copy before they move in.
- Lets of less than 28 days, such as holiday lets: HSE says to display a legible copy of the record in a prominent place in the property.
- You can give tenants an electronic copy if they agree and can access it, but you must provide a paper copy if they ask for one.
What the record must include
According to HSE, the record of a gas safety check must contain, as a minimum:
- a description and the location of each appliance or flue checked
- the name, registration number and signature of the engineer who carried out the check
- the date of the check
- the address of the property
- the name and address of the landlord, or their agent
- any safety-related defect found and any remedial action taken
- confirmation that the check included the examinations required by the regulations
Electronic records are allowed, as long as they can be reproduced on paper when needed, are kept secure and uniquely identify the engineer who carried out the check.
How long to keep it
Keep each record for at least two years. If you use the option to check up to two months early, keep each record until two further gas safety checks have been carried out, which may be longer than two years. Filing every record against the property also gives you a service history for the boiler.
See what records a landlord should keep for the other documents worth filing for a rental.
Scotland and Northern Ireland
Scotland
The Scottish Government’s Repairing Standard guidance repeats the same annual check, 28-day copy and two-year record rules. It also says private landlords must fit carbon monoxide detectors in every room with a fixed combustion appliance, such as a gas boiler, or a flue. See what certificates a landlord needs in Scotland and EICR in Scotland for the other checks.
Northern Ireland
Northern Ireland has its own Gas Safety (Installation and Use) Regulations (Northern Ireland) 2004. nidirect says landlords must arrange an annual gas safety check and only use an engineer on the Gas Safe Register. The Health and Safety Executive for Northern Ireland (HSENI) has consulted on changes to the timing rules, so check the current HSENI guidance before relying on any early-check option.
Official sources
Related guides
- What certificates does a landlord need in Scotland?
Gas safety, EICR and PAT, alarms, legionella, EPC, registration and deposits: what a Scottish landlord needs and how often.
- EICR in Scotland: how often does a landlord need an electrical inspection?
The five-year electrical inspection for Scottish rentals: EICR and PAT, electricians, codes, RCDs and copies for tenants.
- Landlord records: what to keep for a rental property, and for how long
Practical landlord records, the legal duties that may apply, how long to keep key records, and how the four UK nations differ.
This guide is general information about keeping records. It is not legal, safety or technical advice. MyPropertyRecord stores the records and dates you enter; it does not check or determine whether a property meets any legal requirement. Requirements differ across England, Scotland, Wales and Northern Ireland, and by property type, use and tenancy, and they change. Where this guide mentions a legal duty, check the current official guidance linked on this page before relying on it.

